8160 Method for InspectionUGNSOLMATM-SALIVA
1ORDINANCE NUMBER 8160
(Published in The Salina Journal, �� 1971)
AN ORDINANCE PROVIDING A METHOD FOR INSPECTION OF PLUMBING FACILITIES INSTALLED
IN STRUCTURES WHICH ARE BUILT OR ASSEMBLED OTHER THAN AT THEIR ULTIMATE LOCATION AND
EXCEPTING THE SAME FROM THE INSPECTIONS REQUIRED IN THE UNIFORM PLUMBING CODE, SECTION 1-13,
BE IT ORDAINED by the Governing Body of the City of Salina, Kansas:
Section 1. That The Salina Code is hereby amended by adding a section to be
numbered Section 9-205.1 which said section shall read as follows:
''Section 9-205.1 Exception to Inspection Requirement by
Section 1-13 of the Uniform Plumbing Code.
(a). In the event of a residential structure which is built
or assembled other than at its ultimate location, the
Administrative Authority may authorize a licensed professional
engineer or registered architect to perform the required
inspections and certify in writing that all the requirements
of the Uniform Plumbing Code are being complied with. Provided
that the engineer or architect shall not be a regular employee
of the manufacturer of such structures.
(b). If there is cause to believe that any of the sections
of the U. P. C. are not being complied with, the Administrative
Authority may cause any portion of the plumbing and/or gas
system to be inspected by him or his authorized representative,
and may cause any portion of the structure to be dismantled to
perform such inspections.
(c). Procedures to insure compliance will be implemented by
the Inspection Department. These may include but are not
limited to on-site inspection of plumbing and/or gas work,
tests of materials and methods used in assembly of the
structures, and other procedures as may be necessary to
insure the public safety.''
Section 2. This ordinance shall be in full force and effect from and after
its adoption and publication in the official city newspaper.
(SEAL)
Attest:
City Clerk
Introduced: May 24, 1971
Passed: June 7, 1971
ayor