13-10715 Continueing Education RequirementsSummary published in The Salina Journal on September 2013.
ORDINANCE NUMBER 13-10715
AN ORDINANCE AMENDING CHAPTER 8, ARTICLE 111, DIVISIONS 2 AND 3,
SECTIONS 8-175 AND 8-189 OF THE SALINA CODE PERTAINING TO CONTINUING
EDUCATION REQUIREMENTS.
a
BE IT ORDAINED by the Governing Bode of the City of Salina, Kansas:
N
Section 1. That Section 8-175 of Chapter 8, Article 111: Division 2 of the Salina Code is hereby
1 o amended as follows:
Section 8-175. Continuing education requirements for certain qualified individuals.
Any person serving as the qualified individual for a Class A. B or C general contractor or a
Class D contractor/owner license shall, as a precondition of serving as the qualified individual
for renewal of the license; be required to complete eighteen hours (18) hours of continuing
education courses related to the building trades during the term of the license of which three (3)
hours each calendar year [for a total of nine (9) hours] must be instruction on codes that are
equivalent to or newer than the City of Salina's adopted codes. These will include, but not be
limited to the International Building/Residential Codes. International or Uniform Plumbing
Codes. International or Uniform Mechanical Codes, National Electrical Codes. Americans with
Disabilities Act (ADA). Americans with Disabilities Act Accessibility Guidelines (ADAAG), or
other training approved by the Building Official. The building official shall promulgate the
regulations necessary to administer compliance with these continuing education requirements.
Section 2. That Section 8-189 of Chapter 8, Article 111, Division 3 of the Salina Code is hereby
amended as follows:
Sec. 8-189. Continuing education requirements.
Any person licensed as a journeyman or master in the plumbing, electrical. or mechanical
skilled trade license category shall, as a precondition of renewal of the license, be required to
complete eighteen hours (18) hours of continuing education courses related to the building
1 trades during the term of the license of which three (3) hours each calendar year [for a total of
nine (9) hours] must be instruction on codes that are equivalent to or newer than the City of
Salina's adopted codes. These will include, but not be limited to the International or Uniform
Plumbing Codes . International or Uniform Mechanical Codes . or National Electrical Codes.
Continuing education courses must be applicable to the skilled trade for which the journeyman
or master is licensed. The building official shall promulgate the regulations necessary to
administer compliance with these continuing education requirements.
Repealer. That existing Sections 8-159 and 8-189 are hereby repealed.
n 4. Summary of ordinance for publication. That this ordinance shall be in full force and
after its adoption and publication by summary once in the official city newspaper.
Ordinance No. 13-10715 Summary
On October 7, 2013, the City of Salina, Kansas, passed Ordinance No. 13-10715.
The ordinance amends Chapter 8 of the Salina Code by amending Sections 8-175
and 8-189 pertaining to the requirements of continuing education for a qualified
individual for a Class A. B. or C general contractor and Class D contractor/owner
license and renewal of a journeyman or master skilled trade license for plumbing,
electrical or mechanical. A complete copy of the ordinance is available at
xvxvw.salina-ks.uov or in the office of the city clerk, 300 W. Ash Street, free of
charge. This summary is certified by the city attorney.
Introduced: September 16, 2013
Passed: October 7. 2013
�w A
Barbara V. Shirley. Mavor
[SEAL] /
ST
E::
Lieu Ann Elsev. CMC. Ci Clerk