09-10483 Amend IBC Special InspectionsC
(Published in the Salina Journal on February 6, 2009.)
ORDINANCE NUMBER 09-10483
AN ORDINANCE AMENDING CHAPTER 8 OF THE SALINA CODE BY ADDING
SECTIONS 8-15.3 THROUGH AND 8-15,5 AMENDING CHAPTER 17 OF THE 2003
INTERNATIONAL BUILDING CODE PERTAINING TO SPECIAL INSPECTIONS.
BE IT ORDAINED by the Governing Body of the city of Salina, Kansas:
Section 1. That Chapter 8, Article I, Division 1 is hereby amended by adding Section 8-15.3 as
follows:
"Sec. 8-15.3. Amendment to Section 1702 of the International Building Code.
[Section 1702 of the International Building Code is hereby amended to read as follows:]
SECTION 1702 - DEFINITIONS
1702.1 General. The following words and terms shall, for the purposes of this chapter and as
used elsewhere in this code, have the meanings shown herein.
APPROVED AGENCY. An established and recognized agency regularly engaged in
conducting tests or furnishing inspection services, when such agency has been approved.
CERTIFICATE OF COMPLIANCE. A certificate stating that materials and products meet
specified standards or that work was done in compliance with approved construction documents.
FABRICATED ITEM. Structural, load-bearing or lateral load -resisting assemblies consisting
of materials assembled prior to installation in a building or structure, or subjected to operations
such as heat treatment, thermal cutting, cold `working or reforming after manufacture and prior
to installation in a building or structure. Materials produced in accordance with standard
specifications referenced by this code, such as rolled structural steel shapes, steel -reinforcing
bars, masonry units and plywood sheets, shall not be considered "fabricated items."
INSPECTION CERTIFICATE. An identification applied on a product by an approved agency
containing the name of the manufacturer, the function and performance characteristics, and the
name and identification of an approved agency that indicates that the product or material has
been inspected and evaluated by an approved agency (see Section 1703.5 and "Label,"
"Manufacturer's designation" and "Mark").
LABEL. An identification applied on a product by the manufacturer that contains the name of
the manufacturer, the function and performance characteristics of the product or material, and
the name and identification of an approved agency and that indicates that the representative
sample of the product or material has been tested and evaluated by an approved agency (see
Section 1703.5 and "Inspection certificate," "Manufacturer's designation" and "Mark").
MANUFACTURER'S DESIGNATION. An identification applied on a product by the
manufacturer indicating that a product or material complies with a specified standard or set of
rules (see also "Inspection certificate," "Label" and "Mark").
MARK. An identification applied on a product by the manufacturer indicating the name of the
manufacturer and the function of a product or material (see also "Inspection certificate," "Label"
and "Manufacturer's designation").
SPECIAL INSPECTION. Inspection I as herein required of the materials, installation,
fabrication, erection or placement of components and connections requiring special expertise to
ensure compliance with approved construction documents and referenced standards (see Section
1704).
SPECIAL INSPECTION, CONTINUOUS. The full-time observation of work requiring
special inspection by an approved special inspector who is present in the area where the work is
being performed.
SPECIAL INSPECTION, PERIODIC. The part-time or intermittent observation of work
requiring special inspection by an approved special inspector who is present in the area where
the work has been or is being performed and at the completion of the work.
SPRAYED FIRE-RESISTANT MATERIALS. Cementitious or fibrous materials that are
spray applied to provide fire-resistant protection of the substrates.
STRUCTURAL OBSERVATION. The visual observation of the structural system by a
registered design professional for general conformance to the approved construction documents
at significant construction stages and at completion of the structural system. Structural
observation does not include or waive the responsibility for the inspection required by Section
109, 1704 or other sections of this code."
1
1
1 II
Section 2. That Chapter 8, Article I, Division 1 of the Salina Code is hereby amended by adding
Section 8-15.4 as follows:
"Sec. 8-15.4. Amendment to Sections 1704.2, 1704.2.1, and 1704.2.2 of the International
Building Code.
Sections 1704.2, 1704.2.1, and 1704.2.2 are hereby deleted."
Section 3. That Chapter 8, Article I, Division 1 of the Salina Code is hereby amended by adding
Section 8-15.5 as follows:
"Sec. 8-15.5. Amendment to Section 1704.6 of the International Building Code.
[Section 1704.6 of the International Building Code is hereby amended to read as follows.]
1704.6Wood construction. Special inspections of site -built assemblies shall be in accordance
with Section 1704.1."
Section 4. That Sections 8-15.3 through 8-15.5 are hereby added.
Section 5. That this ordinance shall be in full force and effect after its adoption and publication
once in the official city newspaper.
[SEAL]
ATTEST:
e6 A"CMC,lerk
Introduced: January 26, 2009
Passed: FF ry 2, 2009
Jo K. Vanier II, Mayor